10/10 easy to intall life saver
On a 90s-era Audi C4 S4 or S6 with OE 16-inch wheels, the OE full-width center caps are unobtainable. These caps cover just the centers, but the look is just fine.
Premium Rear Rings Trunk Lid Emblems for Audi Models
Upgrade your Audi’s rear end with a clean OEM+ look. Choose from Gloss Black, Matte Black, or Silver, in multiple sizes (including curved options for select Sportback/Hatch models) for a factory-style fit and finish.
- Premium finish: Gloss Black, Matte Black, or Silver
- Easy install: Pre-applied automotive-grade adhesive
- Removable: Debadging-friendly (heat + careful removal)
- Fitment-first: Multiple sizes to match your OEM rings
⚠️ IMPORTANT: Please measure your original rear rings before ordering. Audi uses different rear-ring sizes across models, trims, and years—especially on Sportback/Hatch vehicles.
Why You’ll Love This Upgrade
These rear trunk ring emblems are designed for a sleek, modern appearance without looking “aftermarket.” Whether you’re building a full blackout theme or restoring a clean OEM silver look, this is one of the quickest ways to refresh your Audi’s rear styling.
Key Features
- OEM+ appearance with premium finishes that match common Audi trim themes
- Durable, weather-ready construction for daily driving
- Strong adhesive backing for secure installation
- Multiple sizes including curved (concave) options for select models
What’s Included
- 1 × Rear Audi Rings Trunk Lid Emblem (selected size + selected finish)
Installation (Peel & Stick)
- Wash and fully dry the trunk surface.
- Wipe the mounting area with isopropyl alcohol to remove wax/oils.
- Test-fit placement before removing the adhesive liner.
- Peel the backing, align carefully, then press firmly for 30–60 seconds.
- Let cure 24 hours (avoid washing the vehicle during this time).
Pro Tip: If installing in cold weather, gently warm the area and adhesive with a hair dryer/heat gun on LOW.
📏 Audi Rear Rings Fitment by Size
Select your size based on your current OEM rear rings. Always measure your original emblem first (width × height in mm). For Sportback/Hatch models, confirm whether your OEM rings are curved/concave.
✅ 177 × 58 mm — Compact / Specialty Rear Rings
Fits these Audi models & year ranges (verify measurement):
Audi A4 / S4 — 2000 – 2006(B5/B6)
Audi TT / TTS / TTRS — 2008 – 2020 (8J / early 8S)
Audi R8 — 2008+ (Gen 1 & Gen 2)
RS / S variants of the above (if trunk badge area matches)
Best for select models with smaller or tighter rear badge mounting areas.
Common on performance models and earlier compact platforms where the OEM rings are noticeably narrower than standard sizes.
👉 This size is less common — always measure your original emblem before ordering.
✅ 193 × 67 mm — Standard / Compact Rear Rings
Fits these Audi models & year ranges (verify measurement):
Audi A1 — 2010 – 2019 (8x)
Audi A3 / S3 — 2006 – 201998P)
Audi A4 / S4 — 2007 – 2015 (B7/B8)
Audi A5 / S5 — 2008 – 2016 (B8)
Audi A6 / S6 — 2002 – 2011 (C6)
Audi A3 / S3 — 2006 – 201998P)
Audi A4 / S4 — 2007 – 2015 (B7/B8)
Audi A5 / S5 — 2008 – 2016 (B8)
Audi A6 / S6 — 2002 – 2011 (C6)
Audi A7 / S7 / RS7 — 2023 – 2025 (Sportback-C8)
Audi Q3 / SQ3 — 2011 – 2018 (8U)
Audi Q5 / SQ5 — 2009 – 2016 (B8)
Audi Q7 — 2006 – 2010 (4L)
RS / S variants of the above (if trunk badge area matches)
Audi Q3 / SQ3 — 2011 – 2018 (8U)
Audi Q5 / SQ5 — 2009 – 2016 (B8)
Audi Q7 — 2006 – 2010 (4L)
RS / S variants of the above (if trunk badge area matches)
👉 Best for many earlier model years and compact platforms where the factory rear rings are narrower. Always measure your existing rings before ordering.
✅ 203 × 70 mm — Wide OEM-Style Rear Rings
Fits these Audi models & year ranges (most common trunk badge size):
Audi A3 — 2013 – 2024 (8V/8Y)
Audi A4 — 2016 – 2024 (B8.5/B9)
Audi A5 — 2017 – 2024 (B9 Coupe)
Audi A6 — 2012 – 2024 (C7/C8)
Audi A8 — 2011 – 2024 (D4/D5)
Audi Q5 — 2019 – 2024 (FY)
Audi Q8 — 2018 – 2024 (4M)
Audi TT — 2015 – 2024 (8S)
Audi e-tron / Q8 e-tron — 2019 – 2024
RS / S variants of the above (if trunk badge area matches)
Audi A4 — 2016 – 2024 (B8.5/B9)
Audi A5 — 2017 – 2024 (B9 Coupe)
Audi A6 — 2012 – 2024 (C7/C8)
Audi A8 — 2011 – 2024 (D4/D5)
Audi Q5 — 2019 – 2024 (FY)
Audi Q8 — 2018 – 2024 (4M)
Audi TT — 2015 – 2024 (8S)
Audi e-tron / Q8 e-tron — 2019 – 2024
RS / S variants of the above (if trunk badge area matches)
👉 This size is widely used on modern Audi trunks with larger badge spacing. Always measure width of your existing rings before ordering.
✅ 203 × 75 mm (Curved / Concave) — Sportback / Hatch Rear Rings
Fits these Audi models & year ranges (ONLY if your OEM rings are curved/concave):
Audi A7 / S7 / RS7 — 2012 – 2017(Sportback/Hatch body styles)
RS / S variants of the above (if trunk badge area matches)
RS / S variants of the above (if trunk badge area matches)
👉 Choose this option when your factory rear rings have a noticeable curve to match the trunk contour. Measure and confirm your OEM ring shape before ordering.
✅ 195 × 68 mm (Curved / Concave) — A5 Sportback Rear Rings
Fits these Audi models & year ranges (ONLY if your OEM rings are curved/concave):
Audi A5 Sportback — 2017 – 2024
Audi S5 Sportback — 2017 – 2024
Audi RS5 Sportback — 2017 – 2024
Audi S5 Sportback — 2017 – 2024
Audi RS5 Sportback — 2017 – 2024
👉 Ideal for A5/S5/RS5 Sportback models that use curved/concave rear rings. If your OEM emblem is flat, select a flat size instead.
✅ 230 × 80 mm — Large SUV Rear Rings
Fits these Audi models & year ranges (verify measurement):
Audi Q5 — 2019 – 2024 (Sportback Models Only)
Audi Q7 — 2017 – 2024
Audi SQ7 — 2017 – 2024
Audi SQ7 — 2017 – 2024
👉 Best for select Q7/SQ7 applications using the larger rear-ring footprint. Always measure your OEM emblem before ordering to ensure proper fit.
✅ 202 × 70 mm — Next-Gen OEM Rear Rings (2025+ Models)
Fits these Audi models & year ranges (verify measurement):
Audi A3 / S3 / RS3 — 2025+ (8Y Facelift / Next Gen)
Audi Q3 / SQ3 / RSQ3 — 2025+
Audi Q5 / SQ5 — 2025+ (Next Gen)
Audi Q7 / SQ7 — 2025+ Facelift
Audi Q8 / SQ8 / RSQ8 — 2025+ Facelift / New Design Language
RS / S variants of the above (if trunk badge area matches)
Best for the latest Audi models using the updated rear emblem proportions introduced in 2025+.
These vehicles feature the new wider badge spacing and updated rear design language, often paired with the newer flat or illuminated-style ring designs.
👉 If your vehicle is 2025 or newer, this is likely your size — but always measure to confirm.
Recommended Vehicles (verify your measurement first):
- 2010–2019 Audi A1
- 2006–2019 Audi A3 / S3
- 2005–2015 Audi A4 / S4
- 2008–2016 Audi A5 / S5
- 2002–2010 Audi A6 / S6
- 2012–2019 Audi A7 / S7 (ONLY models with flat rings)
- 2011–2019 Audi Q3 / SQ3
- 2017–2018 Audi Q5 / SQ5
- 2006–2010 Audi Q7
Recommended Vehicles (verify your measurement first):
- 2018–2020 Audi A3 / S3
- 2018–2020 Audi A4 / S4
- 2018–2020 Audi A5 / S5 (note: Sportback/Hatch may use curved rings—see curved options)
- 2017–2020 Audi A6 / S6
- 2018–2020 Audi Q3 / SQ3
- 2019–2020 Audi Q5 / SQ5
Recommended Vehicles (ONLY if your OEM rings are curved/concave):
- Audi A7 / S7 / RS7 Sportback (commonly 2012–2017; verify your OEM ring shape & measurement)
Tip: If your rings sit on a noticeably curved trunk surface and the OEM emblem itself is concave, this is likely the correct profile—measure to confirm.
Recommended Vehicles (ONLY if your OEM rings are curved/concave):
- 2017–2019 Audi A5 / S5 / RS5 Sportback / Hatchback only (with curved rear rings)
Finish Options
- Gloss Black: Deep shine, perfect for a clean blackout look
- Matte Black: Subtle, stealthy finish that matches matte trim themes
- Silver: Classic OEM-style finish
FAQ
Will this damage my paint?
When installed and removed correctly (using heat + safe adhesive removal methods), the emblem is designed to be removable. Always take your time and avoid aggressive prying.
Do I need tools?
No tools are required for installation. For removal of an old emblem, a plastic trim tool and heat source can help.
What’s the difference between flat and curved rings?
Some Sportback/Hatch models use curved/concave rear rings to match the trunk contour. If your OEM emblem has a noticeable curve, choose a curved size option.
How long should I wait before washing the car?
We recommend waiting 24 hours after installation for the adhesive to fully cure.
Black Audi Rings Trunk Emblem Upgrade (OEM+ Look)
Looking for an easy way to refresh your Audi’s rear styling? These premium rear trunk ring emblems deliver a clean, factory-inspired appearance with modern finishes like Gloss Black and Matte Black. With multiple sizes available, you can match your OEM rear rings for a confident fit—whether you drive an A3, A4, A5, A6, A7, Q3, Q5, or Q7. Measure your original emblem, select your finish, and transform your Audi’s rear end in minutes.
