All variants ship same-day from Enthusiast Brands' Colorado warehouse on orders placed before 12pm MT. USPS Priority delivery in 2-4 business days across the U.S.
Dynamic Audi Front Grille Ring Emblem — LED Sweep Animation (Plug-and-Play)
Every time you start the car, the rings light up in a sweeping motion — then hold steady while you drive. This is the latest-generation Audi emblem design paired with a factory-style LED animation. The startup sweep looks like the OEM setup on new RS-line cars, but it's a bolt-on upgrade for grilles going back to the mid-2000s.
▶️ See the dynamic animation in action:
Dynamic startup sweep animation — rings illuminate progressively when the car powers on, then hold at steady on for normal driving
Plug-and-play headlight connector — direct factory-style connector taps the headlight circuit, no wire cutting or splicing required for most vehicles
Latest Audi emblem design — flat, wide-set 4-ring outline used on current RS-line factory cars
Two premium finishes — Crystal (clear crystalline face) and Smoked Crystal (tinted darker face for blacked-out builds)
Three sizes — 252 mm / 273 mm / 285 mm to match all common Audi grille cutouts (see fitment table below)
Premium construction — high-quality ABS shell, reinforced high-toughness snap-in clips, heavy-gauge power lead, crystal-textured luminous housing that stays vibrant day and night
Weather-sealed housing — engineered for continuous exposure to weather and car-wash spray
How the Dynamic Animation Works
This emblem's inner light guides are individually driven so they can illuminate in sequence — the same technique used on OEM-fitted rings on the newest RS-line cars. When ignition switches on, the rings sweep light through the four hoops, then settle to a steady glow that stays on with your parking lights or headlights. There is no app, no remote, and no calibration — the animation is baked into the LED driver and runs the moment power hits the connector.
Install: Direct Plug-and-Play
The wiring harness ends in a factory-style connector designed to mate with your Audi's headlight power feed. On most fitment vehicles it's a slide-together plug — no scotch-locks, no butt-splices, no wire cutting. If your specific trim uses a slightly different connector position, an inline adapter is included (see the last section of this description for the manual).
Audi Dynamic Grille Ring Emblem Size Guide
⚠️ NOTE:Please measure your original emblem BEFORE ordering! A few millimeters of mismatch will prevent clean seating.
252mm x 89mm (9.96" x 3.5") — Small
Part Number: 8J0 853 605 B2ZZ
Latest B9.5 / 8Y flat-ring design
Recommended Vehicles:
2020-2024 Audi A3 / S3 / RS3
2020-2024 Audi A4 / S4 (B9.5)
2020-2024 Audi A5 / S5 / RS5 (B9.5)
273mm x 93mm (10.75" x 3.69") — Medium (most common)
Measure your existing emblem's outer diameter to be certain.
Two Finishes: Crystal vs Smoked Crystal
Crystal — Clear glass-like face with a subtle crystalline sheen. When the LEDs are off, the emblem reads as a light metallic. When lit, the sweep animation glows white through the transparent housing.
Smoked Crystal — Tinted darker face for blacked-out or all-dark builds. When the LEDs are off, the emblem reads as gloss black. When lit, the light punches through the smoked layer with a defined, saturated glow.
Why the Dynamic Version?
The startup sweep is a party trick. Every time you power on the car, the rings light in sequence — passengers and passersby notice instantly.
Plug-and-play install, not a wire splice. Skip the multimeter, skip the wire strippers. The harness connects to a factory Audi power feed.
Latest-generation emblem shape. The wide, flat 4-ring design is what the newest RS-line factory grilles wear. Older grilles get a subtle modernization when you swap.
Delivered in premium retail packaging. Makes a legitimate gift for an Audi owner in your life.
FAQ: How is this different from the static Illuminated version?
The static Illuminated Front Grille Ring Emblem ($64.99) is on/off — you wire it to a 12V source and the rings light steady when powered. This Dynamic version ($159.99) does the sweep animation on startup, uses a plug-and-play headlight connector (no wire splicing), features the latest flat-ring emblem design, and comes with a higher-grade construction rated for continuous outdoor exposure. Both are the same 4-ring outline in outer dimensions; the visual difference is animation + finish quality.
FAQ: Do I need to app-pair it or dim it?
No — the animation is factory-timed in the LED driver. Power on → sweep → steady. Power off → dark. Nothing to configure, no phone required, no memory.
FAQ: Will it be street-legal?
Grille emblems that draw power from parking / headlight circuits are treated as accessory lighting in most jurisdictions. Enforcement varies by state / country. Check your local regs if you drive in an area with strict aftermarket-lighting inspections.
FAQ: How long does install take?
15-30 minutes for most people. The upper grille trim pops off with a plastic pry tool, the factory emblem sits on foam adhesive (cut with fishing line or dental floss behind the rings), then the new emblem snaps in and its harness plugs directly into a factory connector behind the grille. No wire splicing on plug-and-play trims.
Looking for the classic on/off version at a lower price?
The static Illuminated Front Grille Ring Emblem is our $64.99 tier — same three-size fitment across most Audi models, simple on/off illumination, wire-to-parking-light install.
📘
Full Install Manual — 22 pages, ~30-45 min install
Illustrated step-by-step guide for the Dynamic LED emblem. No bumper removal required — the install goes through the hood (radiator support cover comes off, factory emblem is pried from behind the grille). Covers wiring to a 12 V feed with the included harness & inline fuse, plus verification steps to confirm the sweep animation before you button up.
Dynamic Audi Front Grille Ring Emblem — LED Sweep Animation (Plug-and-Play)$199.99$159.99
Oliver
Quick and Easy
A quality piece, the carbon fiber weave matches up nicely with my SQ7’s interior. Took like 5 minutes to install with like half of that watching a video on how to remove the stock one.
Alcantara, Carbon Fiber, and Black perforated leather Gear Shift Knob cover For Audi C8/D5/4M Models
Roberto Morales
Look exactly like shown in picture. Really nice looking. Comes in a nice package boxed. No damages what so ever. But had to glue it to my grille because was a little shorter than the original. After glue look beautiful.
Illuminated Front Grille Ring Emblem for Audi Models
Thomas B
Great accent badge
Looks great and fit perfectly for my idea to use it on Audi e-tron to add some character. (Sorry cars little dirty) Thanks for stocking this badge!
Allroad Sport Flag Badge For B8 B9 Audi Allroad
Rich S.
Audi trunk emblem
Great price, great product, perfect fit, professional look, fast shipping, immediate response to shipping question and rerouting request!!! Need I say more? Thanks for a stellar product and great experience!!
Premium Rear Rings Trunk Lid Emblems for Audi Models
A quality piece, the carbon fiber weave matches up nicely with my SQ7’s interior. Took like 5 minutes to install with like half of that watching a video on how to remove the stock one.
Look exactly like shown in picture. Really nice looking. Comes in a nice package boxed. No damages what so ever. But had to glue it to my grille because was a little shorter than the original. After glue look beautiful.
