Fast shipping good product and they pre-warned me that it would likely not fit because of the size i got. i will be ordering from them again.
Dynamic Floating Audi Wheel Center Caps — Self-Leveling (Set of 4)
The Audi rings stay upright — even when your wheels don't. A weighted internal bearing keeps the logo level while the outer cap rotates with the wheel, delivering the same self-orienting effect made famous by Rolls-Royce hubs. From a stopped stance to highway pace, your logo reads perfectly straight from every angle.
- Self-leveling floating mechanism — internal counter-weight and low-friction bearing keep the emblem upright at any wheel speed; no batteries, no wiring, nothing to charge
- Precision-fit sizing — 60 mm / 61 mm / 68 mm / 69 mm to match the four common Audi cap openings
- Two finishes — Gloss Black or Metallic Gray (see gallery)
- Set of 4 — one cap per wheel, shipped in premium retail packaging
- OEM cap opening compatible — designed to snap into factory Audi wheels with the same clip geometry as your original caps
- Durable ABS construction with mirror-acrylic emblem overlay, weather- and UV-resistant, safe through car washes
How the Floating Mechanism Works
Unlike a static cap that turns with the wheel, this cap has two parts: a fixed outer housing that snaps into the wheel and an inner emblem disc that spins freely on a low-friction bearing. A small internal counter-weight keeps the emblem's four-ring logo pointing "up" via gravity — the same principle used on high-end floating hub caps by Rolls-Royce and other premium marques. No power source, no calibration, no maintenance.
📏 Select Your Size (Measure Before Buying)
Audi cap size depends on the wheel design, not just the vehicle year/model. Please measure your wheel's cap opening or your current cap before ordering.
- 60 mm (≈ 2.36 in)
- 61 mm (≈ 2.40 in)
- 68 mm (≈ 2.68 in)
- 69 mm (≈ 2.72 in)
- Gloss Black
- Metallic Gray
How to measure correctly
- Outer Diameter (O.D.) — Measure the widest point of your existing cap or the wheel's cap opening (front face). This should match 60 / 61 / 68 / 69 mm.
- Inner Clip Diameter (I.D.) — Measure the distance between the inner clip tabs on the back of the cap or the mating surface in the wheel. This ensures the clips seat securely.
- Depth / Clip Design — Some wheels share the same O.D. but differ slightly in clip geometry; check your existing cap if available.
Tip: If you have your original cap, the OEM part number is molded on the back and cross-references to the sizes above:
60 mm — 4B0-601-170 · 61 mm — 4M0-601-170 · 68 mm — 8D0-601-170 · 69 mm — 4B0-601-170A
Millimeters to Inches (Quick Reference)
| Size (mm) | Size (inches) |
|---|---|
| 60 mm | ≈ 2.36 in |
| 61 mm | ≈ 2.40 in |
| 68 mm | ≈ 2.68 in |
| 69 mm | ≈ 2.72 in |
Installation
- Remove your existing wheel center cap (pop out from the front, or push out from behind depending on wheel design).
- Confirm the outer diameter of your old cap matches the floating cap you selected.
- Align the new floating cap and press firmly and evenly around the perimeter until all clips seat with a soft "click."
- Rotate your wheel slowly — the emblem should stay upright as the wheel turns. This is normal.
No adhesives, no tools required. If your wheel is off the car, seat the cap before reinstalling — makes alignment easier.
Fitment Notes:
- Designed for factory (OEM) Audi wheels. Some aftermarket wheels have non-standard cap bores — measure first.
- Center cap sizing varies by wheel design. The same vehicle may use different cap sizes across different OEM wheels.
- If between sizes, re-measure with a caliper. A 1 mm difference can prevent proper seating.
Why the Floating Version?
- Head-turning effect at car meets and stops — the logo behavior gets noticed immediately
- All the OEM benefits (correct diameter, factory clip pattern, weather resistance) plus the self-leveling upgrade
- Delivered in retail-grade packaging — makes a solid gift for the Audi owner in your life
- No batteries, no lights, no maintenance — the mechanism is purely mechanical
FAQ: Are these LED / lit?
No — this listing is the mechanical floating version. The emblem is a mirror-acrylic overlay that stays upright via a weighted internal bearing. No batteries or wiring involved. If you want illuminated caps, that's a separate future product.
FAQ: Will they still work in cold weather / rain / car washes?
Yes. The bearing mechanism is sealed inside the housing and rated for continuous exposure to weather and car-wash spray. Extreme cold can add a very brief lag before the emblem re-centers when the wheels stop — nothing damaging, just a fraction of a second.
FAQ: Will these fit my Audi model?
Fitment depends on the wheel design, not the model/year. Measure your current cap or wheel opening and match the size above (60 / 61 / 68 / 69 mm). If you have your OEM cap, the part number on the back cross-references to the sizes listed in this description.
FAQ: What if I ordered the wrong size?
No problem — contact us and we'll help you swap for the correct size per our return/exchange policy. To avoid delays, please measure before buying.
Prefer the classic OEM look at a lower price?
The floating mechanism isn't for everyone — some drivers just want a clean factory replacement. Our OEM-Style Wheel Center Caps use the same four sizes and two finishes at $34.99 per set of four. Same fitment, static logo, no floating mechanism.
